USB Type-C DC 5V CW Morse Telegraph Touch Sensitive Automatic Key Module Amateur Radio Morse
193
Direct purchase from the factory 
Zabezpečená platba
Dárek zdarma
Dopravní podmínky
Reklamační podmínkyDárek Zdarma
Vítejte v Roymall, vaší profesionální obchodní stránce pro prémiové dárky. Velmi si vážíme vaší podpory a jako poděkování nabízíme dárek zdarma s každým nákupem. Připraveni prozkoumat naši sbírku? Prohlédněte si náš výběr, uskutečněte objednávku a těšte se na dárek zdarma s vaším nákupem.Dopravní Podmínky
Objednávky zpracováváme do 2 dnů. Objednávky vložené o víkendu nebo svátcích budou zpracovány následující pracovní den.Standardní doba dodání je 5-7 pracovních dnů.Doba dodání se může lišit v závislosti na destinaci.1. Reklamační Podmínky
Přijímáme pouze vrácení zboží zakoupeného přímo z roymall.com. Dárky zdarma nelze vrátit. Vrácené zboží musí být nepoužité a v původním obalu.Vrácení zpracujeme do 3-5 pracovních dnů po obdržení.Personalizované předměty nelze vrátit.Kontaktujte nás: service@roymall.com nebo Whatsapp: +86193598494712.Podmínky Vrácení Peněz
Obdržíte plnou náhradu po obdržení a kontrole vráceného zboží. Náklady na dopravu nejsou vratné.Kontaktujte nás: service@roymall.com nebo Whatsapp: +8619359849471
Parameter:
Power Supply Voltage: Type-C interface DC-5V
Output Interface: 3.5mm interface
Operating Environment: -40u00b0C to 85u00b0C
Principle Description:
The touch key is divided into upper and lower layers, the upper layer is the main circuit and interface part of the key, and the lower layer is the magnet fixing base. The whole machine uses a touch chip to sense the capacitance change from the metal ball. After the human body touches the metal ball, the change in capacitance is transmitted to the relevant pins of the chip through the line, and the relevant keying signal is amplified and driven by the triode, and finally transmitted to the At the key interface, the logics of the whole machine is that the effective keying signal is low level, and the non-touch signal is 5V high level. This level form matches the operation of most radios. The lower layer is a strong magnet, which can be sucked on any iron shell and play the role of fixing the electric key.
Instructions for Use:
The USB cable can be connected to a mobile phone charger or a computer. Note that the USB must be powered by 5V, and other voltages will burn the chip. After the power is turned on, the LED at the position of the USB port will light up, indicating that the power supply is normal. At this time, if you touch the left and right metal balls, you can see the LED light at the corresponding ball position. At this time, the touch is valid and the product function is normal. The touch button on the right is for a short time, which represents a point, and the touch button on the left is for a long time, which represents a stroke.
Package Include:
1x Touch Key Module
Power Supply Voltage: Type-C interface DC-5V
Output Interface: 3.5mm interface
Operating Environment: -40u00b0C to 85u00b0C
Principle Description:
The touch key is divided into upper and lower layers, the upper layer is the main circuit and interface part of the key, and the lower layer is the magnet fixing base. The whole machine uses a touch chip to sense the capacitance change from the metal ball. After the human body touches the metal ball, the change in capacitance is transmitted to the relevant pins of the chip through the line, and the relevant keying signal is amplified and driven by the triode, and finally transmitted to the At the key interface, the logics of the whole machine is that the effective keying signal is low level, and the non-touch signal is 5V high level. This level form matches the operation of most radios. The lower layer is a strong magnet, which can be sucked on any iron shell and play the role of fixing the electric key.
Instructions for Use:
The USB cable can be connected to a mobile phone charger or a computer. Note that the USB must be powered by 5V, and other voltages will burn the chip. After the power is turned on, the LED at the position of the USB port will light up, indicating that the power supply is normal. At this time, if you touch the left and right metal balls, you can see the LED light at the corresponding ball position. At this time, the touch is valid and the product function is normal. The touch button on the right is for a short time, which represents a point, and the touch button on the left is for a long time, which represents a stroke.
Package Include:
1x Touch Key Module
Electronics Ranking
