MS309 OBD2 Can Bus Engine Reader Car ATVFault Diagnostic Instrument OBD2 Clear Fault Code Diagnostic Scan Tool Universal Version
7
Direct purchase from the factory 
Zabezpečená platba
Dárek zdarma
Dopravní podmínky
Reklamační podmínkyDárek Zdarma
Vítejte v Roymall, vaší profesionální obchodní stránce pro prémiové dárky. Velmi si vážíme vaší podpory a jako poděkování nabízíme dárek zdarma s každým nákupem. Připraveni prozkoumat naši sbírku? Prohlédněte si náš výběr, uskutečněte objednávku a těšte se na dárek zdarma s vaším nákupem.Dopravní Podmínky
Objednávky zpracováváme do 2 dnů. Objednávky vložené o víkendu nebo svátcích budou zpracovány následující pracovní den.Standardní doba dodání je 5-7 pracovních dnů.Doba dodání se může lišit v závislosti na destinaci.1. Reklamační Podmínky
Přijímáme pouze vrácení zboží zakoupeného přímo z roymall.com. Dárky zdarma nelze vrátit. Vrácené zboží musí být nepoužité a v původním obalu.Vrácení zpracujeme do 3-5 pracovních dnů po obdržení.Personalizované předměty nelze vrátit.Kontaktujte nás: service@roymall.com nebo Whatsapp: +86193598494712.Podmínky Vrácení Peněz
Obdržíte plnou náhradu po obdržení a kontrole vráceného zboží. Náklady na dopravu nejsou vratné.Kontaktujte nás: service@roymall.com nebo Whatsapp: +8619359849471
Specifications:
Product Name: Car Fault Detector
Display: 2.4 inches
Voltage: 12V
Main Control Chip: MCU
Operating Temperature: -40~65 (u2103)
Supported Languages: English, German, Dutch, Spanish, French
Product Size: 68*103*16mm
Weight: 165g
Features:
1. Retrieve generic and manufacturer-specific diagnostic trouble codes (DTCs), including definition lookup software on CD and display DTC definitions on screen.
2. Features a large, easy-to-read backlit LCD screen, multi-language menus and DTC definitions, and a standard 16-pin OBD-II connector; no additional cables required.
3. View freeze frame data, display monitor and I/M ready status, turn off the Check Engine Light (MIL), clear codes, and reset monitors.
4. Supports CAN (Controller Area Network) protocol and all other current OBD-II protocols.
5. For all OBD-II compliant US, European and Asian vehicles (OBD-II is standard on all cars sold in the US after 1996).
Using the Scan Tool Procedure:
1) Turn the ignition off.
2) Locate the vehicle"s 16-pin Data Link Connector (DLC).
3) Connect the scan tool cable connector to the vehicle"s DLC. The cable connector is keyed and can only be installed one way. (If you have trouble connecting the cable connector to the DLC, rotate the connector 180 degrees and try again.
4) Turn the ignition on. Do not start the engine.
5) When the scan tool cable connector is properly connected to the vehicle"s DLC, the LCD display will show instructions to select a new scan.
6) Press the New Scan button and the display will show a series of messages showing the OBD2 protocol until the vehicle protocol is displayed.
Package Includes:
1 x Car Diagnostic Tool
1 x Manual
Notes:
If the scan tool cannot communicate with the vehicle"s computer, a message that a link cannot be established with the vehicle will be displayed.
-Confirm that the ignition is on.
-Check that the scan tool"s OBD2 connector is securely connected to the vehicle"s DLC.
-Verify that the vehicle is OBD2 compliant.
-Turn the ignition off and wait about 10 seconds. Turn the ignition back on and repeat the process starting from step 6.
Product Name: Car Fault Detector
Display: 2.4 inches
Voltage: 12V
Main Control Chip: MCU
Operating Temperature: -40~65 (u2103)
Supported Languages: English, German, Dutch, Spanish, French
Product Size: 68*103*16mm
Weight: 165g
Features:
1. Retrieve generic and manufacturer-specific diagnostic trouble codes (DTCs), including definition lookup software on CD and display DTC definitions on screen.
2. Features a large, easy-to-read backlit LCD screen, multi-language menus and DTC definitions, and a standard 16-pin OBD-II connector; no additional cables required.
3. View freeze frame data, display monitor and I/M ready status, turn off the Check Engine Light (MIL), clear codes, and reset monitors.
4. Supports CAN (Controller Area Network) protocol and all other current OBD-II protocols.
5. For all OBD-II compliant US, European and Asian vehicles (OBD-II is standard on all cars sold in the US after 1996).
Using the Scan Tool Procedure:
1) Turn the ignition off.
2) Locate the vehicle"s 16-pin Data Link Connector (DLC).
3) Connect the scan tool cable connector to the vehicle"s DLC. The cable connector is keyed and can only be installed one way. (If you have trouble connecting the cable connector to the DLC, rotate the connector 180 degrees and try again.
4) Turn the ignition on. Do not start the engine.
5) When the scan tool cable connector is properly connected to the vehicle"s DLC, the LCD display will show instructions to select a new scan.
6) Press the New Scan button and the display will show a series of messages showing the OBD2 protocol until the vehicle protocol is displayed.
Package Includes:
1 x Car Diagnostic Tool
1 x Manual
Notes:
If the scan tool cannot communicate with the vehicle"s computer, a message that a link cannot be established with the vehicle will be displayed.
-Confirm that the ignition is on.
-Check that the scan tool"s OBD2 connector is securely connected to the vehicle"s DLC.
-Verify that the vehicle is OBD2 compliant.
-Turn the ignition off and wait about 10 seconds. Turn the ignition back on and repeat the process starting from step 6.
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Automobiles & Motorcycles Ranking
![[EU Direct] Autel MaxiDiag MD806 Full System Diagnoses OBD2 Car Automotive Scanner Tool 4 Systems Diagnosis 7 Most Special Reset Services](https://static.roymall.com/d/file/mall/titlepic/234/j1y3lx2omdi.jpg?x-oss-process=image/resize,w_237/quality,Q_80/format,webp)
0 Liked Přidáno do košíku- Foldable Car Ramps for DIY Maintenance with 3-Section Ramps
- 411
- $277.99/ $451.390
![[EU Direct] 2023 New Autel MaxiPRO MP808BT PRO Auto Diagnostic All System Scanner Upgrade of DS808 Same Function as MS906](https://static.roymall.com/d/file/mall/titlepic/234/cab87919-9543-4799-ac16-8974858edfe8.jpg?x-oss-process=image/resize,w_237/quality,Q_80/format,webp)
![[EU Direct] Autel MaxiBAS BT608E Car Battery Tester Scanner 12V 24V 100-3000 CCA Battery Analyzer All System Diagnostic Battery Registration Tool](https://static.roymall.com/d/file/mall/bigpic/234/5b5219c7-a170-4fdf-bc94-5d434a9bd94c.jpg?x-oss-process=image/resize,w_237/quality,Q_80/format,webp)
![[EU Direct] Autel XP400PRO Car Key Programmer Tool And Chip Programmer Work Car Key Diagnostic Tool For Car Maintenance](https://static.roymall.com/d/file/mall/bigpic/234/73facdee-211e-4527-af5b-e1cce3d57daa.jpg?x-oss-process=image/resize,w_237/quality,Q_80/format,webp)
